file-manager/tools/benchmark-watch-install.sh

#!/usr/bin/env bash
#
# Answers MIUI's "Install via USB" dialog while installs are happening on the device.
#
#   ./tools/benchmark-watch-install.sh                     # ten minutes, poll every 2 s
#   ./tools/benchmark-watch-install.sh --interval 5        # poll less often when idle
#   ./tools/benchmark-watch-install.sh --burst 30          # keep watching fast for 30 s after a dialog
#   ./tools/benchmark-watch-install.sh --dry-run           # report, never tap
#
# Run this for *every* install, not just the first: a benchmark run installs the test APK and then, per
# test, the app under test. Measured the hard way — the first version of this script spent three to four
# seconds reading one dialog, and the next dialog opened and closed inside that window.
#
# How it answers a dialog:
#
#   1. If the Install button's position for this dialog was measured before (and saved), tap it — but
#      only after re-checking, immediately beforehand, that an installer window is still focused. That
#      check is what stops a tap from landing on the home screen once the dialog closes.
#   2. Otherwise read the screen (`uiautomator dump`), find the button by label — refusing anything that
#      means "no" — verify the installer is still focused, then tap its own bounds and save the position
#      for the dialogs that cannot be read in time.
#   3. If no Install button can be read and no position is known, tap nothing and say so.
#
# After every dialog the script watches in "burst" mode (every 0.4 s instead of the idle interval),
# because installs arrive in pairs and the second one used to slip through while the first was read.
#
# Measured on the Xiaomi phone (Android 12, MIUI 14): an adb-started install raises the dialog after
# about 1.7 s with a ten second deny countdown, so there is time for one dump and one tap; the same
# dialog is FLAG_SECURE, so a screencap of it shows whatever is behind it.
# No `-e`: this is a watcher that has to survive for the whole run, and a single failed adb call must not
# end it. It ended silently once before, in the middle of a benchmark run, which is why it looked like it
# had "stopped running" — a helper ending in `| head -1` takes a SIGPIPE when `head` exits first, and
# `pipefail` plus `-e` turned that into an exit.
set -uo pipefail

seconds=600
interval=2
burst=30
wait=10
dry_run=0

while [ $# -gt 0 ]; do
    case "$1" in
        --seconds) seconds=$2; shift 2 ;;
        --interval) interval=$2; shift 2 ;;
        --burst) burst=$2; shift 2 ;;
        --wait) wait=$2; shift 2 ;;
        --dry-run) dry_run=1; shift ;;
        -h|--help) sed -n '2,26p' "$0" | sed 's/^# \{0,1\}//'; exit 0 ;;
        *) echo "usage: $0 [--seconds N] [--interval N] [--burst N] [--wait N] [--dry-run]" >&2; exit 2 ;;
    esac
done

command -v adb >/dev/null || { echo "benchmark-watch-install: adb is not on PATH" >&2; exit 1; }
command -v python3 >/dev/null || { echo "benchmark-watch-install: python3 is needed to read the UI dump" >&2; exit 1; }

device_dump=/sdcard/.benchmark-watch.xml
local_dump=$(mktemp)
trap 'rm -f "$local_dump"' EXIT

answered_token=""
tapped_token=""
last_tap_at=-100
opened_windows=0
taps=0
misses=0

focused_window() {
    adb shell dumpsys window 2>/dev/null | grep -m1 'mCurrentFocus' || true
}

# Only the installer's own windows count; anything else is left alone.
is_installer() {
    case "$1" in
        *securitycenter*install*|*InstallApp*|*packageinstaller*) return 0 ;;
        *) return 1 ;;
    esac
}

# The window token, so the same dialog is not answered twice while it closes.
window_token() {
    sed -n 's/.*mCurrentFocus=Window{\([0-9a-f]*\).*/\1/p' <<<"$1" | head -1 || true
}

# The activity that owns the focused window. Dialogs each get their own window token, so the token
# cannot be used to tell "the dialog I read is still up" from "another installer dialog replaced it" —
# which is exactly what happens when a run installs twice in quick succession. The activity name is
# stable across both, and it is still specific enough that a tap can only ever land on an installer.
installer_activity() {
    sed -n 's/.*u0 \([^ }]*\).*/\1/p' <<<"$1" | head -1 || true
}

# Prints "<x> <y> <label>" for the dialog's Install button, or nothing at all.
install_button() {
    adb shell uiautomator dump "$device_dump" >/dev/null 2>&1 || return 0
    adb pull "$device_dump" "$local_dump" >/dev/null 2>&1 || return 0
    python3 - "$local_dump" <<'PY' || true
import sys
import xml.etree.ElementTree as ET

DENY = ('verweigern', 'deny', 'ablehnen', 'abbrechen', 'cancel', 'nein', 'no')
ALLOW = ('installieren', 'install', 'erlauben', 'zulassen', 'allow')

def centre(node):
    x1, y1, x2, y2 = (int(v) for v in node.get('bounds').strip('[]').replace('][', ',').split(','))
    return (x1 + x2) // 2, (y1 + y2) // 2

for node in ET.parse(sys.argv[1]).getroot().iter('node'):
    if 'Button' not in node.get('class', ''):
        continue
    text = (node.get('text') or '').strip()
    low = text.lower()
    if not text or any(low.startswith(d) for d in DENY):
        continue
    if any(low.startswith(a) for a in ALLOW) or node.get('resource-id', '').endswith('button2'):
        x, y = centre(node)
        print(x, y, text.replace(' ', '_'))
        break
PY
}

# Reads the button, and taps it only if the dialog is *still* the focused window at that moment. Called
# only while an installer window is up.
#
# The re-check is the whole point of this function. A dump takes three to four seconds, which is longer
# than the dialog can live, so the position read from a dying dialog used to be tapped after it had
# closed — and the tap landed on whatever the home screen had at those coordinates (a Telegram icon, in
# the run that made this obvious). Nothing here is remembered between dialogs either, for the same
# reason: a remembered position is a blind tap waiting to happen.
answer_dialog() {
    local focus=$1 token activity label now_focus
    token=$(window_token "$focus")
    activity=$(installer_activity "$focus")
    if [ "$token" != "$answered_token" ]; then
        answered_token=$token
        opened_windows=$((opened_windows + 1))
    fi

    # One tap per dialog. A second would be a tap on whatever the dialog left behind.
    if [ "$token" = "$tapped_token" ]; then
        return 0
    fi

    local attempt
    for attempt in $(seq 1 "$wait"); do
        read -r button_x button_y label <<<"$(install_button)"
        if [ -n "${button_x:-}" ]; then
            now_focus=$(focused_window)
            if ! is_installer "$now_focus" || [ "$(installer_activity "$now_focus")" != "$activity" ]; then
                echo "  $(date +%H:%M:%S) read '$label' at $button_x,$button_y, but the dialog closed before the tap; not tapping"
                return 0
            fi
            # Whatever installer dialog is up *now* is the one being answered; it may be a newer window
            # than the one this function was called for, which is exactly the case that used to be
            # skipped.
            if [ $((SECONDS - last_tap_at)) -lt 2 ]; then
                echo "  $(date +%H:%M:%S) a tap went out less than 2 s ago; not tapping again"
                return 0
            fi
            tapped_token=$(window_token "$now_focus")
            last_tap_at=$SECONDS
            if [ "$dry_run" -eq 1 ]; then
                echo "  $(date +%H:%M:%S) would tap '$label' at $button_x,$button_y"
            else
                adb shell input tap "$button_x" "$button_y" || true
                taps=$((taps + 1))
                echo "  $(date +%H:%M:%S) tapped '$label' at $button_x,$button_y (read from the screen, installer still up)"
            fi
            return 0
        fi
        sleep 0.5
    done

    misses=$((misses + 1))
    echo "  $(date +%H:%M:%S) installer window focused, but no Install button appeared within ${wait}s"
}

deadline=$((SECONDS + seconds))
burst_until=0
last_beat=$SECONDS
echo "benchmark-watch-install: watching for $seconds s (idle poll ${interval}s, burst after a dialog)"

while [ $SECONDS -lt $deadline ]; do
    # A heartbeat, so "is it still running?" can be answered by reading the log instead of guessing.
    if [ $((SECONDS - last_beat)) -ge 30 ]; then
        echo "  $(date +%H:%M:%S) still watching: $taps answered, $opened_windows window(s) seen"
        last_beat=$SECONDS
    fi

    focus=$(focused_window)
    if is_installer "$focus"; then
        answer_dialog "$focus"
        burst_until=$((SECONDS + burst))
        sleep 0.7
        continue
    fi

    if [ $SECONDS -lt $burst_until ]; then
        sleep 0.4
    else
        sleep "$interval"
    fi
done

echo "benchmark-watch-install: done, $taps tap(s), $opened_windows installer window(s) seen, $misses not answerable"